Ultra Portable 3 in 1 heat tool. Melt - cut & Solder. 2 x AA

3IN1 MULTITOOL 2AA
Foam Cutter / Soldering Iron / Pyrography Iron in a single device.

Now you can mould and shape polystyrene, quickly and easily solder or etch wood without checking where the nearest plug is!

The Multi Heat tool is powered by 2 AA Batteries to cut out the need for mains power and, expensive and heavy transformers.
Yet the batteries will give a long lasting heat!

Plug and Start System:
Simply swap the tip of the main unit and
you are good to go!

Handy and easy to use.
Deployable in many situations thanks to the ability to swap tools so quickly.

The foam and polystyrene cutter tool comes with an easily replaceable cutting wire. (Spares available separately).

A warning LED tells you when the tool is operating. Obviously care should be taken as this is a heat tool and touching the tips while in use or immediately after can result in burns.

Technical Data:
? Foam cutter: Max. cutting width 60mm / Max. cutting depth 210mm
? Two Duracell AA batteries or similar required - not included.
? Min. temperature 165 °C
? Max. temperature 480 °C
? Heat-up time 2 - 8 secs

Contents:
? MULTI TOOL ST 103 Main unit 3in1 2AA version
? ST 103 Soldering tip
? ST 103 Pyrography tip
? ST 103 Foam cutter tip
? 3 pcs cutting wire ST 103
? Manual


Typical battery life:
Cutting foam: 60 minutes
Soldering 60 minutes
Etching Wood: 20 minutes